Question 1

What types of gutter guard do you install?

Accepted Answer

We install premium aluminium and stainless-steel mesh gutter guards from leading Australian manufacturers. During our free on-site assessment we'll recommend the best product for your roof type, gutter profile and local conditions — whether that's a fine ember guard mesh for a bushfire-prone area or a robust leaf guard for a heavily treed property.

Question 2

Do I still need gutter cleaning after guards are installed?

Accepted Answer

Gutter guards dramatically reduce the need for cleaning, but a light inspection and rinse every 2–3 years is recommended to clear fine sediment and check the mesh is secure. Most of our customers go from cleaning twice a year to almost never needing it.

Question 3

What is an ember guard and do I need one?

Accepted Answer

Ember guard is a finer-grade mesh specifically rated for ember protection under Australian bushfire standards. If your property sits in a BAL-rated bushfire attack zone — common throughout the Southern Highlands, parts of Shoalhaven and the escarpment areas around Wollongong — ember guards are strongly recommended and sometimes required by council.

Question 4

What's the difference between aluminium and steel gutter guards?

Accepted Answer

Aluminium mesh is lightweight, corrosion-resistant and ideal for most coastal and suburban properties. Steel (usually galvanised or stainless) is heavier-duty and suited to properties with overhanging vegetation, greater debris loads, or where maximum strength is required. Both options are available — we'll advise which suits your home.

Question 5

How much does gutter guard installation cost?

Accepted Answer

Pricing depends on your home's roof type, gutter length, pitch and access difficulty. We provide free, no-obligation on-site quotes so you know the exact cost before any work begins. There are no hidden fees or surprises — the price we quote is the price you pay.

Question 6

Will gutter guards damage my roof or void my warranty?

Accepted Answer

Our installation does use screws as part of the fixing system, but the method has been tested and approved to Australian standards. When installed correctly, it does not cause leaks or compromise the integrity of your roof. All our work is backed by a workmanship guarantee.

Question 7

How do you protect solar panels from birds?

Accepted Answer

We install purpose-built solar panel bird mesh (critter guard) around the perimeter of your panels using UV-stabilised clips that attach directly to the panel frame — no drilling into panels or roof required. This blocks all nesting access while maintaining proper ventilation beneath the panels.

Question 8

Do you clean solar panels as well?

Accepted Answer

Yes — we offer specialist solar panel cleaning in Wollongong and across the Illawarra. Clean panels can recover 15–25% of lost output. We use deionised water and soft brushes safe for all panel coatings.

Question 9

How do you stop birds and possums getting into the roof?

Accepted Answer

We identify and seal all entry points using appropriate mesh or physical barriers — around eaves, gutters, ridge caps and vents. For possums specifically, we follow NSW regulations which require one-way exits to allow animals to leave safely before sealing.

Question 10

What are bird spikes used for?

Accepted Answer

Bird spikes are used to deter birds from landing and roosting on ledges, fences, pergolas, air conditioning units and other flat surfaces. They're a humane, low-maintenance deterrent that doesn't harm birds.

Question 11

How long does installation take?

Accepted Answer

Most residential gutter guard installations are completed in a single day. Larger properties or more complex rooflines may take two days. Solar panel bird mesh is usually completed within a few hours. We'll confirm timing during your free quote.

Question 12

Do you offer a warranty?

Accepted Answer

Yes. We provide a workmanship guarantee on all installations. Product warranties vary by manufacturer but typically range from 15 to 25 years on the mesh. We're here for the long term — if anything isn't right, we'll fix it.

Question 13

What areas do you service?

Accepted Answer

We service the entire NSW South Coast and Southern Highlands including Wollongong, Shellharbour, Kiama, Nowra, Berry, Bowral, Mittagong, Moss Vale, Ulladulla, Batemans Bay and everywhere in between. Contact us if you're unsure whether we cover your suburb.

Frequently Asked Questions

Get Your Free Quote